E-max CAD/CAM

This is made from a digital impression. This is NOT suitable for cantilever bridges.

StrengthAesthetics
+++

Suitable for:

  • Crown
  • Veneers
  • Inlay/Onlay

What to send

Digital impression and completed lab prescription form.

Other Crown and Bridge extras:

  • Pink Porcelain
  • Shade Change
  • Use of Facebow in Lab
  • Post and core in one piece
  • Separate pin for addition root in post and core
  • Zirconia post and core
  • Mask post and core with white
  • Metal substructure for temporary units
  • Wire for temporary bridge
  • Wax up
  • Rest and milled shoulder for future frame
  • Metal key key way / Dove tail
  • Zirconia key key way / Dove tail
  • Porcelain butt margin
  • Metal margin all around
  • Metal backing
  • No metal showing
  • Fit crown under denture
  • Borrowing Facebow/Articulator
  • Shade match to picture or old crown

Guide for Full Ceramic preparations

Anterior crown

Posterior crown

Veneers

Onlay / Inlay

Partial crown

Instructions for anterior cases

Manage the expectation of your patient by making a wax up and requesting a stent over the wax up to be able to base your temporaries on the wax up. Send us an impressions of the temporaries and tell us what you would like to copy and what you would like to improve.

E.MAX

Contraindications:

  • very deep subgingival preparations
  • patients with severely reduced residual dentition
  • parafunctions, e.g. bruxism
  • provisional insertion/trial wear period
  • bridges with a pontic beyond 5’s or bigger then 9mm
  • cantilever bridges
  • more then 3 unit bridges
  • adjustments without polishing (please use appropriate burs only)
  • always indicate if there is strong discolourations on the die
  • don’t make sharp corner preparations
  • for inlays/onlays the preparation margins must not be located on centric antagonist contacts

ZIRCONIA

Contraindications:

  • provisional insertion/trial wear period
  • adjustments without polishing (please use appropriate burs only)
  • always indicate if there is strong discolourations on the die
  • don’t make sharp corner preparations
  • for veneer cases give us a “wrap around the incisal edge”
  • check bonding procedures, and repeat these regardless of lab procedures
  • wings are charged as unit