E-max Press
This material is great for anterior restorations, gives excellent aesthetics.
| Strength | Aesthetics |
|---|---|
| ++ | +++ |
Suitable for:
- Crown
- Veneers
- Inlay/Onlay
What to send
- Full Arch Silicone impression with wash for working model
- Alginate impression for opposing
- Silicone or wax bite
- Completed lab prescription form
Other Crown and Bridge extras:
- Pink Porcelain
- Shade Change
- Use of Facebow in Lab
- Post and core in one piece
- Separate pin for addition root in post and core
- Zirconia post and core
- Mask post and core with white
- Metal substructure for temporary units
- Wire for temporary bridge
- Wax up
- Rest and milled shoulder for future frame
- Metal key key way / Dove tail
- Zirconia key key way / Dove tail
- Porcelain butt margin
- Metal margin all around
- Metal backing
- No metal showing
- Fit crown under denture
- Borrowing Facebow/Articulator
- Shade match to picture or old crown
Guide for Full Ceramic preparations
Anterior crown
Posterior crown
Veneers
Onlay / Inlay
Partial crown
Instructions – For anterior cases:
Manage the expectation of your patient by making a wax up and requesting a stent over the wax up to be able to base
your temporaries on the wax up. Send us an impressions of the temporaries and tell us what you would like to copy and
what you would like to improve.
E.MAX
Contraindications:
- very deep subgingival preparations
- patients with severely reduced residual dentition
- parafunctions, e.g. bruxism
- provisional insertion/trial wear period
- bridges with a pontic beyond 5’s or bigger then 9mm
- cantilever bridges
- more then 3 unit bridges
- adjustments without polishing (please use appropriate burs only)
- always indicate if there is strong discolourations on the die
- don’t make sharp corner preparations
- for inlays/onlays the preparation margins must not be located on centric antagonist contacts
ZIRCONIA
Contraindications:
- provisional insertion/trial wear period
- adjustments without polishing (please use appropriate burs only)
- always indicate if there is strong discolourations on the die
- don’t make sharp corner preparations
- for veneer cases give us a “wrap around the incisal edge”
- check bonding procedures, and repeat these regardless of lab procedures
- wings are charged as unit
